D+ CLASSIC EPOXY GROUT – 3 PART is a 3-component, solvent-free, epoxy resin-based grout consisting of a Base, Hardener and specially selected fine colour Fillers. The components are mixed to produce a smooth, non-slump paste grout. It provides a stain-resistant, chemical-resistant, hard-wearing and impervious tile joint filler with a high degree of resistance to abrasion and impact.

The product is designed for applications including residential and industrial projects, food and pharma processing units, swimming pools, hospitals, restaurant kitchens, shopping malls and sports centres.

D+ CLASSIC EPOXY GROUT – 3 PART provides stain resistance, chemical resistance, hygienic and hard-wearing properties. It is easy to mix and apply, does not crack or powder, can be cleaned after application with a damp sponge, and is non-toxic.

Advantages

• Stain resistant and easy to clean.
• Easy to mix and apply.
• Excellent chemical resistance.
• Hygienic.
• Hard wearing.
• Impervious tile joint filler.
• Non-cracking.
• Non-powdering.
• Resistant to abrasion and impact.
• Can be cleaned with a damp sponge after application.
• Non-toxic.
• Smooth, non-slump paste consistency.

Application

D+ CLASSIC EPOXY GROUT – 3 PART is suitable for:

• Residential projects
• Industrial projects
• Food processing units
• Pharma processing units
• Swimming pools
• Hospitals
• Restaurant kitchens
• Shopping malls
• Sports centres

Application Process

Surface Preparation:
Tiles must be firmly fixed and joints must be free from tile-fixing adhesive, contamination, dust, oil and water. Joints must be clean and completely dry before grouting.

Mixing:
Shake the Hardener bottle and stir the Base before mixing. Add all Hardener to the entire Base and mix thoroughly. Slowly add the pre-measured Filler and mix until a uniform colour and lump-free consistency is achieved. High-speed or excessive mixing should be avoided.

Application:
Press the grout firmly into the joints using a hard rubber squeeze, ensuring that joints are completely filled. Work in small areas and remove excess grout diagonally across the grout lines.

Cleaning:
Clean surplus grout within 10–15 minutes using a rough textured sponge dampened with clean water. A damp sponge can then be used in a circular motion to achieve a flush joint. Epoxy/water residue should be cleaned using a fine textured damp sponge. Light epoxy residue can be removed using an alkaline detergent.

Consumption / Coverage

The datasheet states that the coverage values are indicative and can vary depending on tile size, tile thickness, joint width and wastage during application.